Ghost Immobiliser Fitting
Protect your vehicle from theft of keys hacking, cloning, and theft with the first aftermarket CAN immobiliser. With the added option to connect to a Ghost app and GPS tracking system, which can send you call alerts when your car is altered with or stolen.
The installation of an Ghost immobiliser can be done by a qualified technician. The right tools, insulation tape, and heat shrink tubing is crucial.
Getting Started
Ghost immobilisers can be a great alternative to physical theft protection devices such as car alarms and wheel locks. They guard your vehicle without using LED indicators or key fobs. They are connected directly to the ECU CAN data network and are activated only by entering a PIN code. This offers a higher level of security against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It can be a bit like navigating an icy minefield. One mistake could cause irreparable damage to the circuits of your vehicle's electrical system. To avoid this, it's crucial that you know the procedure for installing and prepare your vehicle appropriately.
You'll need to take out interior panels from the vehicle to make room for your immobiliser. Once you have found the perfect location to conceal it then use cable tie to fix it. Then, clean up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover exposed connections. This will reduce the risk of an accidental short circuit, while improving the aesthetics and reducing the chance of theft.
Find a source of constant 12V power, and a grounding source for the ghost immobiliser. Once you've located them check the power cables using a multimeter. Finally, connect the CAN H and CAN L wires from the immobiliser to your chosen power source and the grounding point.
Once you've made all of the necessary connections It's crucial to double-check the connections and examine the immobiliser for signs of corrosion or other damage. The process of entering a PIN and launching the vehicle is a great way to test the system. This should be an integral part of your routine, because it will allow you to spot any intermittent issues early. Regular testing can help extend the life of your device and ensure it is performing at its best.
Preparing the vehicle
Installing a Ghost immobiliser is a process that requires skills and knowledge. A wiring diagram is crucial to identify the right wires, establishing precise connections and ensuring security. A multimeter can be used to verify electrical values and guarantee security. Cable tie and insulation tape can be used to secure connections and shield them from being tampered with. A user's manual will provide specific guidance tailored to your Ghost Immobiliser model.
Once installed, a ghost immobiliser is able to stop unauthorised engine starts by requiring the driver to enter a unique PIN sequence using buttons on the steering wheel or center console. The code can be changed at anytime by the vehicle owner by hand or remotely via an app on mobile. The device is silent and is undetectable by thieves since it doesn't emit radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by the ECUs and blocks the engine from running if it detects a false signal. The system is tamper-proof and weatherproof, with no key fobs or LED indicators to draw the attention of thieves.
It can be positioned behind the dashboard or in an inconspicuous area, so that it isn't seen by thieves and does not interfere with the vehicle's performance. It could even be placed inside a small, compact box, making it less likely to be found during the test drive by unscrupulous car salespeople.
Its stealthy operation, along with its integration into the CAN-bus system of the vehicle, can be an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key cloning. Combining the system with other security measures will create a formidable barrier that can deter even the most persistent of thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers to be fitted, as they can drastically reduce monthly premiums.
Making Connections
Contrary to traditional security systems which are heard by thieves ghost immobilisers operate in a quiet manner to prevent them from knowing when your vehicle has been switched on. They also stop high-tech methods used to steal vehicles such as OBD port hacking. Installing them without leaving permanent marks on your vehicle is an ideal alternative for those planning to sell their vehicle in the near-future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to protect your car from theft. It disables your engine using the CAN data network and generates a unique PIN number which is difficult to steal from criminals. It can be used in many vehicles and works with many available features, including car alarms, GPS trackers, steering wheel locks, and door bypass systems for locks.
If you choose to use an Ghost immobiliser for your vehicle, make sure to consult the wiring schematic to identify the wires that connect. Verify the location of these wires to ensure accuracy, and mark them with tape or labels to aid in keeping track of them. It is also necessary to locate a source of continuous power (12V) and a grounding point for the system. Once you have these in place, you are able to begin making the connections to complete the installation.
If the ghost immobiliser has been connected to your CAN bus it will stop your vehicle from starting until you enter a pin number using the buttons on the dashboard or the steering wheel. This will stop ECU cloning as well as other methods of vehicle theft. In addition, it could be used in conjunction with other Thatcham-approved security equipment, such as alarms and tyre clamps, to provide your vehicle with an even greater degree of security.
As the UK automotive aftermarket industry continues to grow, so do the options for securing your vehicle. With so many avenues for thieves to get in and steal your car it's essential to take every precaution to protect it from being taken away. Ghost immobilisers have become a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it very difficult for thieves to steal your key fob to start your vehicle, and more difficult to disable the system through hacking its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help locate your vehicle if it's stolen. This feature is not an everyday feature in security products that are available from the market however it's an excellent option to increase your security and get peace of mind knowing that your vehicle is always secure.
ghost 2 immobiliser cost -II immobiliser not only provides enhanced security but also a pleasant experience for the user by not having to use additional key fobs or devices. It features an easy and simple PIN code entry system that is seamlessly integrated into your everyday routine. It also comes with convenience features and deactivation settings that allow you temporarily disable the immobiliser to valet park or service your vehicle.
Make sure you have the tools you need and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will provide you with the ability to make precise connections while a multimeter will help check electrical values. Insulation tape and heat-shrink tubing are vital to protect connections from short circuits. Cable ties can be used to secure wiring. Additionally, it is essential to work in a well-lit location and wear appropriate safety gear when working with electrical tools and components.
You should test the Ghost immobiliser after you have completed the installation to make sure it's functioning properly. It is recommended to first start the car without entering the PIN. If this doesn't work then you'll have to test again and examine the connections more carefully.
In contrast to other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is far more effective than conventional physical deterrents such as wheel clamps or steering locks. It is TASSA-approved, and recognized by some insurance companies. This makes it a cost effective investment that will give you the peace of heart you deserve.