Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is a cutting-edge anti-theft system that utilizes advanced technology to stop car theft. This hidden device is not detected by thieves and will only start your engine when a PIN number or app is entered.
Full File and connects to the CAN data network of your vehicle. It also comes with the service/valet mode that allows you to start your car for a short period when it's in the garage for cleaning or servicing.
Easy to install
The Ghost immobiliser shields your car from key theft as well as hacking, cloning and stealing. It uses a PIN code system that is integrated into your car's electronic control unit, making it hard for thieves to identify. In contrast to traditional immobilisers, it does not require any special keys or sensors and is completely hidden without any LED indicators or signals to signal its presence. It's also cheaper than replacing an ECU, or installing a key fob. It can even lower your insurance premiums.
When installing a Ghost 2 immobiliser, be sure to follow the instructions of the manufacturer carefully. This will ensure the device functions properly and efficiently. After the installation is completed, test the system by entering the PIN code, then turning on the engine. Regular testing will allow you to spot any issues early.
Double-check the location of CAN H and L wires before beginning the installation. They are essential to power the immobiliser, and it is important to ensure that they are connected correctly. Labeling the wires will help you locate them when installing. Once you have identified the wires, connect them both to a power supply of 12V and the grounding source. Make sure to use a fuse tap if needed to protect the connections from damage or short circuits.
After connecting the wires, neaten the wiring using cable ties to avoid interference. It is also recommended to cover the connections with insulation tape or heat shrink tubing. This will help protect them from electrical shorts, and will increase the life span of the device. Once the wiring is secured it's a good idea test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode for situations in which you may have to surrender your vehicle like when it is being repaired or valet parked. This will disable the PIN sequence for a short period of time. To activate this feature, press the brake pedal while holding down the accelerator, and press a number of times equal to the first digit of the emergency code. The system will then enter service mode, which is confirmed by flashing the indicator signal 5 times.
Easy to change PIN codes
It is simple to secure your vehicle from theft using a ghost 2 immobiliser. It is installed discreetly inside the vehicle, and can only be accessed with a code. The device communicates with the vehicle ECU via its data bus and does not rely on radio frequency signals like traditional alarm systems or aftermarket Thatcham immobilisers do. This makes it difficult for thieves to listen for the click of an immobiliser relay or add new key fobs. The control unit is hidden within the wiring harness or dashboard, and cannot be physically altered to reset the system.
The ghost 2 immobiliser is connected to your vehicles CAN Data network and uses the buttons already present on the steering wheel, door panels, and the centre console to create an individual sequence of up 20 button presses that must be entered before the engine starts similar to a PIN code. This next-generation system does not require any cutting of wires when it is installed and can be reprogrammed at any time. You can also put your vehicle in Valet or Service mode to allow it to start for a short time when you give it to a mechanic to work.
The application can also be used to disable your PIN code in the event that you've lost your keys or change it. This feature is particularly useful if you've given your car to another person for valet service or parking. It prevents them from starting the car and driving it away without your permission. It is also inaccessible to professional thieves as it does not use any radio frequencies or circuit cuts.
Another benefit of the ghost 2 immobiliser is its ability to prevent relay thefts. Relay theft is among the most popular methods of car theft. Criminals can hack your car's diagnostic ports then alter the signal sent by the car's ECU to fool it into thinking that a valid car key is present. This is how traditional immobilisers can be bypassed, however, with an immobiliser that is ghost 2, the signal is blocked before it can reach the ECU.
Simple to use app
Ghost 2 is an immobiliser that is revolutionary. It safeguards your vehicle from key-cloning. It connects to the CAN data network of your vehicle and requires an PIN code to start the engine. It also prevents thieves using signal spoofing and device spoofing that are popular tactics to steal vehicles.
The system is simple to use and works like an ordinary auto alarm. Once you have installed it, you can create an individual PIN code sequence that is up to 20 digits long, which will have to be entered before the vehicle is started. This will prevent the vehicle from being stolen, even if you lose your keys. You can turn off the system by downloading an app for your phone.
Contrary to other systems that are silent, the ghost is quiet and does not emit any radio frequency signals. It is a discreet weatherproof device that can be positioned anywhere in your vehicle. It can be easily hidden beneath the dash, steering wheel, or door panels. It communicates with your ECU through the CAN data circuit and is not affected by diagnostic tools that thieves employ to locate security systems. It is not affected by jamming devices that spoof codes.
It is a covert installation that does not require any wire cutting or modifications to the vehicle and can be employed as an anti-theft device for any vehicle. The technology has been proven to be effective, and it complies with TASSA Standards. The ghost is a great solution for classic, sports and prestige automobiles, and can also be used to secure vehicles that are being hired out through apps such as Turo.
The Autowatch Ghost 2 is the next generation in car immobilisers. The system is inaccessible to thieves, and blocks them from starting your car without your PIN or unless they have been authorized by the app. It does not emit radio frequencies or any other signals scanners could detect. The process of installing the app is simple and quick. The app is easy to navigate and offers a user-friendly interface which allows for easy configure and use. It also comes with a GPS tracker that can help police locate the vehicle and recover it.
Easy to reset
A ghost 2 immobiliser is an excellent method to guard your vehicle from theft. It works with your vehicle's ECU to create a barrier that thieves cannot penetrate without the correct PIN. The device is also TASSA-certified which means it is recognized by insurance companies. It's an effective tool for preventing car theft, and will save you a lot of money over the long term.
The Ghost system unlike traditional alarms and immobilisers that require cutting circuits it is directly connected to your vehicle's CAN data network. It operates by pressing the buttons on your dashboard as well as the steering wheel. You can create an individual PIN sequence, which can be up to 20 presses long. The PIN has to be entered before your engine can begin as it would be the PIN you use on your credit card. The Ghost system is completely inaccessible to thieves and has no LEDs to indicate its presence. This makes it the most effective aftermarket CAN-bus immobiliser on the market today.
Another benefit of the Ghost system is that it does not utilize radio frequency signals, meaning it cannot be scanned or intercepted by thieves. This helps to prevent relay attacks and keys that are cloned, as well as the more common method of hacking into a car's CAN bus system by scanning for signals from the alarm/immobiliser. The Ghost system is designed so that it is able to be hidden inside your vehicle. There aren't any LEDs, or other signals to show its presence.
The system comes with the option of a Transport Mode that disables the Ghost System. This is beneficial in situations where you require a temporary deactivation of Ghost, such as when you're transporting or maintaining your vehicle. However, this mode is not as efficient as Service Mode, as it does not turn off the Ghost system if your vehicle is traveling over 31 mph for 15 minutes.
To reset your ghost 2 immobiliser, you'll need the emergency code, which is available from your installer. It is usually hidden under a scratch-off area on the card supplied with the installation. You should keep this emergency code safe and keep it in a place that is secure, such as your wallet at home.